Meng Tai Eyewear/Lens Processing
Lens processing
Cut, printed
and etched in house.
Lenses are cut to the frame on our own CNC machines, and branded here by printing or laser etching. The frame they fit into was molded in the same building.
Why cutting in house changes the fit
A lens and the groove it sits in are a matched pair. The frame has a molding tolerance, the lens has a cutting tolerance, and the fit is what happens when the two meet. When the lens comes from somewhere else, nobody owns that sum — the lens supplier cut to the drawing, the frame was molded to the drawing, and the assembly line discovers what that adds up to.
Cutting
The lens outline is drawn in CAD from the frame, the toolpath is programmed from that outline, and the lens is cut on a CNC router. Bevel and edge finish are part of the program, which means they repeat — a hand-finished edge does not.
Printing and etching
Brand marks go onto the lens two ways. Printing puts a mark on the surface and can carry color. Laser etching removes a controlled amount of coating, so on a mirrored lens the mark reads as the lens beneath the mirror — permanent, and it cannot be rubbed off.
Lens materials
- Polycarbonate (PC)
- Nylon
- TAC polarized
- PC polarized (PCPL)
- Nylon polarized
Lens options
- Multilayer mirror coatings
- REVO coating
- Photochromic
- High-contrast tints
- Gradient tints
- Blue-light filtering
- Infrared (IR) filtering
What we do not do here
Mirror coatings, photochromic and polarized film are specifications we supply, not processes that run on our floor. Those lenses arrive finished and are then cut, printed, etched and fitted here. We say which is which because the difference shows up on the first factory audit anyway, and a buyer is entitled to know where each step happens.
Testing
Finished lenses are measured here against EN ISO 12312-1, ANSI Z80.3 and AS/NZS 1067 — transmittance, UV400, filter category and color limits — along with impact, abrasion and polarized axis. See testing and compliance.
What to send
The frame, or the frame drawing, plus the lens material, tint or coating specification, and artwork for any mark. If the lens is to be cut to an existing frame we have not molded, send a sample frame — a drawing of a part that already exists is a description of what it was meant to be.
Send us the frame.
Tell us the lens specification and what should be printed or etched on it.
Request a quotation